Wednesday, January 30, 2013

Red Hot Teddies with Gold Leaf


Ah, Valentines - the day we celebrate love. And who could me more in love than these two cuties? This is the QKR Stampede image Bear Hugs and the Sentiment is from the Best Wishes Werdz Set. What really sets this particular card apart is the Gold Foil detail, and you can order Gold Leaf in several colors.

It's Technique and Tutorial Day for QKR and Eureka. Deb here to tell you about my experiment with Gold Leaf  for this post. I've never bought Gold Leaf before because I've always heard it was really fussy and hard to work with. The truth is that crafters won't have any problem handling this beautiful product. If you already work with glitter or embossing powder, this will be a piece of cake for you.
I used Cricut's Plantin cartridge to cut a heart from the backing of a pad of paper since I didn't have a chipboard heart in my stash. Then I placed the heart on a piece of Scor-Tape and trimmed around the edges with non-stick scissors, keeping a small border of tape (just enough to cover the cut edge of my heart). When that was done, I flipped the heart over onto a scrap sheet of paper and peeled off the backing.

I opened the bag of gold leaf, and that's when the fun began! Beautiful pieces of varigated colored red and pink gold leaf just waited to be taken out of the bag. I carefully lifted out a small piece, carefully applied it to the sticky heart and just as carefully smoothed it out as best as I could. So far, so good, and so very pretty! In no time I relaxed and picked up the pace. I found I didn't have to be too fussy about covering the entire area because, when I picked up my brush and started removing any excess pieces of foil, they naturally stuck to any areas that weren't already foiled. There was very little waste, but you could return any crumbs to the bag. I was surprised at the very generous amount of gold leaf you receive in the bag.

Well, covering the heart was so much fun, I decided to run a strip of 1/2 inch Scor-Tape across my 5 1/2 inch designer paper and foil that, too.

At this point I cut a label with a Spellbinder, stamped and heat embossed my sentiment, and adhered that to the upper corner. I cut a piece of red cardstock at 5 3/8 inches, and a base card at 5 3/4 inches from white Stardream Metallic cardstock. All the layers were then adhered.


I colored the fur of my bear couple with Copics. After allowing them to dry, I moistened a scrap of old washcloth with Blender Solution and dabbed the bear bodies to create the look of fur. When that dried, I colored their clothes and patches, and adhered the bears to the font of the card with pop dots. Adhering the foiled the heart was all that was left to complete the project.

Unfortunately, as you can see below, The Boss was not impressed with how much time I spent creating this card. She placed her body strategically between me and my supplies - a strong signal that NOW would be good time to pay attention to the cat.


Check out this blog for all our great previous posts, see what my Technique and Tutorial team mates are cooking up on the Eureka Stamps Blog and visit me anytime on my blog I Love It!. Thanks for visiting today, and hope to see you next Wednesday for a new Technique and Tutorial. Deb 

9 comments:

  1. I love your card but I especially love your picture of your cat. It is identical to my sierra who died 2 years ago almost and I miss her so much. thank you for sharing with us. Hugs, Cathy K

    ReplyDelete
  2. Wonderful tutorial today. I love the heart made with the Gold Leaf and those teddies are adorable. joann sassy raggedy

    ReplyDelete
  3. What an awesome tutorial!! You sure made it look like it was fairly easy to do. Like you, I've heard some negative things about leafing and have also shied away from using it.

    I especially like how you colored the bears, then used blender solution to achieve that soft fur look. I'm definitely going to try that.

    Yes, the cat looks like she's completely "over it". LOL

    Thanks, again!!

    ReplyDelete
  4. Fabulous card Deb, and brillant tutorial on Gold Leaf with chipboard!! Love how your heart and strip turned out with your adorable Teddies!! Thank you so much for another fantastic tutorial!! Well done dear!

    ReplyDelete
  5. Deb, i've never had the privilege of using Gold leaf! This is a great tutorial and i may have to try it. Thanks for the inspiration!

    ReplyDelete
  6. What a Fantastic Tutorial, Deb!! I love how you used the Gold Leaf! I totally want to try it now!! It's on my to do list!! Thank you so much for sharing your talent with us!!

    Many Blessings,
    Tina

    ReplyDelete
  7. What a fabulous tutorial Deb!! And the card turned out gorgeous. Me too have that problem with my two cats :-) if I stay too long in my craft room and not paying enough attention to them. Especially one of them, Gäsper, places himself right on top of my projects. ;-) Gotta love them!

    Thanks for sharing this wonderful tutorial with us!

    Hugs Mian

    ReplyDelete
  8. Great job with the tutorial. I love working with gold leaf, such fun. And such an adorable card!

    ReplyDelete
  9. Love the tutorial. I have some yummy gold leaf, and will have to try this method!
    BTW ... your card is yummy! ;)

    ReplyDelete